Saturday, March 22, 2008

From Slab To Roughed Out Cab



We now have our slab cut, so it's time to decide what we will do with it. What size, what shape?


With this decided we find our template place it on the slab and hold it securely while we trace around the template with a fine line black permanent marker pen.


Now we take the slab to the trim saw to trim as close to the traced lines as we can. Trimming saves your grinding wheels so much wear and tear. Our trim saw is made by Lortone it has an 8" continuous rim diamond blade, which cuts the rock like slicing through butter. We use Marcol7
an Esso product, for a cooling agent which works very well.
It's important to clean the oil off the rock extremely well so the dop wax will stick to your rock. I use a product called Simple Green

to cut the oil on the rock but washing with dish soap and hot water several times will work as well. Just a little note of caution here, do not slab or trim pourous rock using oil as a coolant, for example opal or turquoise. When your rock is cleaned put it onto the warm surface of your dop pot and leave it until it is heated through.

When the rock is heated take a dop stick (made out of wood dowels) and twirl some dop wax onto the stick and quickly place exactly in the middle of your cut blank take the blank off the heat and put it aside and let it cool naturally.


Some people put the rock into water to cool it faster, I do not like this method, I believe this makes the bond weaker. We are now ready to start the grinding process.





Coming next The Grinding Process

Until then Rock On!
Jeannine
Handcrafted Jewelry

1 comment:

Raka said...

Great post! I'm looking into cabbing myself (will buy an Ameritool soon, but it still needs to get shipped across the pond), and you have a good quick round up on the process.