Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Wednesday, July 16, 2008

Simple Pincushion Tutorial




I am changing the pace up on here a bit, from lapidary to sewing? Yep! I am having some difficulty in coming up with a variety of articles on lapidary or on jewelry so I am going to be adding other types of tutorials and articles. May make it a bit more fun!!
This is a fun easy pincushion project. This pincushion can be done by hand sewing.



Materials needed for the pincushion

- A 6.5" paper or foam plate
- Screw lid from a regular mouth canning jar the older lids work better as they have more depth.
- Some fiberfill
- A large fabric circle about 11 - 12'' in diameter.
- A small fabric circle about 8" in diameter.
- Bits of ribbon and decoration

Instructions












1) With a hand sewing needle, sew a gathering stitch around the perimeter of the large circle
2) Pull the thread to start gathering fabric. Insert your paper plate face down onto the fabric.
3) Pull the gathering thread tight around the circle and tie the thread off. I like to off set the circle a little more towards the bottom.


4) Gather the small circle same as you did for the large circle. Lay the jar ring top down onto the small circle then stuff the lid with the fibre fill.

5) Pull your gathers tight and tie thread off.

6) Place the top onto the base.


7) Hand stitch top to base.
8) For the finishing touches decorate as you like. I use some ribbon for a band and a few ribbon roses.
9) Attach a piece of ribbon or crochet a loop on the back for a hanging loop.

You have a very quick and simple to make pincushion. This is a great inexpensive craft idea if you are into donating craft type items for craft sale fund raisers.
Until Next Time Craft On!
Jean9

Tuesday, July 8, 2008

Recycle Food Tins

I have been saving some of my tin cans and making pencil holders, change holders, candle holders or whatever turns your crank!
I like to save my tuna tins or salmon tins they make fabulous catch alls. The taller tins are not easy to come by with out the ribs in the tin. The ones that I have were from canned asparagus, that is the only tin that I have found that is not ribbed.

Make sure that you do not have any rough tin burrs left on the can from opening. Peel the paper off and make sure that the glue is removed really well, if there is some residue of glue it will show after the tin is painted.










I know aerosol is not at all a green product!
You can use brush on paint for the tins so as not to use aerosol, but it really doesn't work too well.

Spray or brush the tins with a flat black, or color of your choice, spray paint. I like the black background, I think it looks really cool with whatever I decide to decorate with.















For this tuna tin I used acrylic paints and used a flower pattern and method that I learned when I used to tole paint eons ago! I use it for a candle holder. I sprayed it with a matte finish krylon spray.



This tin has been painted with acrylic paints as well. Just use whatever method of painting or embellishing you choice to use. You can see that this tin has not been sprayed with a lacquer.


This Tin is easy enough for kids to make.
With this tin I simply glued some really nice flower decals and embellished the rim edge with some gold trim. For a kids project there are so many wonderful decals, trims, phrases and letters. Using your imagination the possibilities are endless. What an easy, inexpensive and useful little gift to make for a childs teacher or daddy or mommy!






Here are a few different embellishments that I picked up to decorate my tin with.



When you have your tin decorated the way you want it to be you can paint it with a clear lacquer paint, either a matte or a gloss it depends on your preference. The tin that I have displayed as a candle holder has been lacquered, the others haven't been, notice the difference.

Until Next Time
Keep On Rockin' On
Jean9

Friday, June 27, 2008

I Needed Jewelry Holders For Displays

So I decided to make my own!
I didn't want to spend a lot of money on making display holders for my jewelry so here are a couple that I came up with.

This is a bracelet holder but I have just extended the center dowel to whatever length I wanted and I have made some for necklace holders as well.

You will need:
1 inch dowel (If you can get a softer wood that is preferable)
3/8 inch dowel
Piece of 1 x 4" board for the base
A drill and a 3/8" bit
A small drill bit for the size of screw you use
1 screw
piece of felt



I cut my dowel to 6 1/2 inches. For my necklace holders I cut my dowel to 13 inches. The 3/8 dowel is cut 10 inches. Cut it longer if you want to hang a lot of jewelry on one display holder. Make a mark 3/4" from the top of the 1" dowel. Turn the dowel 1/4 turn and make a mark 1 1/2" from the top for the other dowel. Make sure that these marks are centered. Now drill your holes through the dowel keeping your drill very straight, If your drill goes in a little crooked, especially in the up and down position, then your cross dowels will not be level. If your hanger dowels end up being not too level, cut them shorter and it won't be so noticeable.

For the base:
The board for the base is a 1 x 4" board that I cut to 5 inches long.
On the bottom side of the 1 x 4 board make a pencil mark from diagonal corners to find the center of your board. Drill a hole through the board with a drill bit to match the size of screw that you choose. Find the center in the bottom end of your 1" dowel and drill a hole into it for the screw as well. I then take a larger bit and drill out the start of the hole in the board, to be able to counter sink your screw head, so that your display is not a little rocky with a screw head sticking out. Put it together and spray paint it to the color of your choice. I also added a gold sparkle spray paint to mine. I glued some flat rocks to the ends of my 3/8" dowels to prevent my jewelry from slipping off. Your final step is to glue a piece of felt onto the bottom of the 1 x 4" board. I used craft glue, carpenters glue would work as well. When the glue is dry then trim the felt around the board. This is certainly an easy and cost effective display project. Very easy to make and attractive on your table at your showing.

If you didn't glue stop ends onto the ends of your 3/8" dowel you could take the dowels out of the stand which would make them more compact for transportation to your showing venue.

Here is another one!
This is a wire CD holder that I purchased at Value Village for $1.99, I had a vision!





















I bent the two ends of the wire rack to open past center and will use it for an earring and pendant holder. This is what it looks like now. I am pleased a punch! I put my earrings on holder cards, the cards fit in between the wires just perfectly to be pressure held tightly in place. How easy is this one!

Until Next Time
Keep On Rockin' On!
Jean9

Monday, May 5, 2008

Jewelry Tutorials a Wealth of Information


There are many wonderful sites offering tutorials on making jewelry.
From bead stringing to wire wrapping and everything in between. I will try to present some of my favorites. I hope you visit some of these sites and use the tutorials and some of the techniques explained in the tuts.

Information and instruction patterns on using wire to make jewelry components. There are hundreds of patterns here. If you have a wigjig you will be on your way.
http://www.wigjig.com/


This is a video on wirewrapping a square stone.
http://wire-sculpture.com/video/wiresculptedsquarestonependant.php

Videos from expert village narrated by Cathlene Wright from Cathlene Wright Jewelry New York City and Miami. There are numerous videos in this series.
http://www.eduslide.net/courses/923/Wire-Wrapping-Techniques-for-Making-Jewelry.htm


Eni Oken renoned jewelry artist. She has many technique tips and tutorials as well as tutorials for sale. She also has many links to other sites with instructions.
http://www.enioken.com/jewelry/technique.html


Cabachon Ring Wire Wrapping Tutorial from Dawn and Evan on the website You Are My Sunshine.
http://www.dawnandevan.com/cabochan_wire_wrap_tutorial.htm


Learn how to make wire jewelry for fun and profit utilizing the fastest instructional methods available. From Liberty Wire Artworks. These videos are for sale at $24.99 each.



Free tutorials and project sheets on beading from Consumer Help Web. If you look around this site there is a wealth of interesting information.



Here is a tutorial on making prongs with wire wrapping.



This is an index of free tutorials on jewelry making of all sorts. This site is well worth a good look.



Here's another index of wire wrapping tutorials, there are also a lot of other interesting projects. http://www.wittyliving.com/crafts/jewelry/wirewrap_index.html


Celtic Knot Wire Wrap Charm or Pendant Tutorial


Creating tutorials is a lot of time consuming work. Give credit and thanks to the authors who are kind enough the let us use them.

Until next time keep on Rockin' On!
J9