Cutting the Slabs

I will take you through the process required to make a cabochon to set into a jewelry finding
Using the self feed, 10" slab saw, which we were lucky enough to purchase on ebay, we slab our rocks. The slabs we make are from 1/4" to 3/8". This is the thickness that we like to use, the slabs can be made thicker or thinner, depending on the use of the slab. Often times we have to cut quite a number of rocks before we get a slab that we want to use. We are also getting better at reading the rock, deciding which way to cut the rock to get the best pattern. It is just amazing how different a rock can look from one cut to the next or by flipping the rock to a different angle. We cool our diamond blade with a solution of Raycool and water. Raycool made by Raytech has a rust inhibitor in it. I find that we still get some rust in our saw, but as long as we use it often the rust does not affect the blade. Mineral oil is the better choice for blade cooling but also in my opinion too messy. We do all our slabbing in my basement, and so I do not care to have the big oil mess! So for now we will use the water solution .
Using the self feed, 10" slab saw, which we were lucky enough to purchase on ebay, we slab our rocks. The slabs we make are from 1/4" to 3/8". This is the thickness that we like to use, the slabs can be made thicker or thinner, depending on the use of the slab. Often times we have to cut quite a number of rocks before we get a slab that we want to use. We are also getting better at reading the rock, deciding which way to cut the rock to get the best pattern. It is just amazing how different a rock can look from one cut to the next or by flipping the rock to a different angle. We cool our diamond blade with a solution of Raycool and water. Raycool made by Raytech has a rust inhibitor in it. I find that we still get some rust in our saw, but as long as we use it often the rust does not affect the blade. Mineral oil is the better choice for blade cooling but also in my opinion too messy. We do all our slabbing in my basement, and so I do not care to have the big oil mess! So for now we will use the water solution .
Until next time Rock On!


The red lines in this illustration indicate the grinding of the rock. From the girdle line on one side, rotate the cabochon to the girdle line on the other side, keep this rotating action from the girdle over the top to the girdle on the other side in all directions back and forth. Holding your dop stick and rocking in all directions cutting evenly all the way around and over the top. When you are happy with the shape of your cabochon then it will be time to go to the next wheel. From here on it will be a matter of removing the scratches made from the ginding wheel.