Monday, March 24, 2008

Rock Fever


We fell into the rock fever craze! After attending a rock and mineral show early in the spring of 2007 two almost retired sisters came in contact with rock fever! Since that day we eat, sleep and breath rocks. Our stock pile of stone, precious to us is quite enormous for the short time we have been involved. Now we have rocks and so we need equipment! So a lot of time and energy was put into researching equipment and thank goodness for ebay we started bidding on the equipment that we needed and won our bids. What excitement when our slab saw arrived then our trim saw and our six wheel rock grinder called "The Genie". I have to say that we have been production fanatics since! We did produce enough stock to build an E-Store. Right now we are having a bit of a breather until we get into it full tilt again. We have quite a number of different ideas that we would like to see materialize.

Until next time Rock On!
Jeannine


Sunday, March 23, 2008

The Cabochon Making Process

Cutting the Slabs


I will take you through the process required to make a cabochon to set into a jewelry finding

Using the self feed, 10" slab saw, which we were lucky enough to purchase on ebay, we slab our rocks. The slabs we make are from 1/4" to 3/8". This is the thickness that we like to use, the slabs can be made thicker or thinner, depending on the use of the slab. Often times we have to cut quite a number of rocks before we get a slab that we want to use. We are also getting better at reading the rock, deciding which way to cut the rock to get the best pattern. It is just amazing how different a rock can look from one cut to the next or by flipping the rock to a different angle. We cool our diamond blade with a solution of Raycool and water. Raycool made by Raytech has a rust inhibitor in it. I find that we still get some rust in our saw, but as long as we use it often the rust does not affect the blade. Mineral oil is the better choice for blade cooling but also in my opinion too messy. We do all our slabbing in my basement, and so I do not care to have the big oil mess! So for now we will use the water solution .
Until next time Rock On!

Saturday, March 22, 2008

From Slab To Roughed Out Cab



We now have our slab cut, so it's time to decide what we will do with it. What size, what shape?


With this decided we find our template place it on the slab and hold it securely while we trace around the template with a fine line black permanent marker pen.


Now we take the slab to the trim saw to trim as close to the traced lines as we can. Trimming saves your grinding wheels so much wear and tear. Our trim saw is made by Lortone it has an 8" continuous rim diamond blade, which cuts the rock like slicing through butter. We use Marcol7
an Esso product, for a cooling agent which works very well.
It's important to clean the oil off the rock extremely well so the dop wax will stick to your rock. I use a product called Simple Green

to cut the oil on the rock but washing with dish soap and hot water several times will work as well. Just a little note of caution here, do not slab or trim pourous rock using oil as a coolant, for example opal or turquoise. When your rock is cleaned put it onto the warm surface of your dop pot and leave it until it is heated through.

When the rock is heated take a dop stick (made out of wood dowels) and twirl some dop wax onto the stick and quickly place exactly in the middle of your cut blank take the blank off the heat and put it aside and let it cool naturally.


Some people put the rock into water to cool it faster, I do not like this method, I believe this makes the bond weaker. We are now ready to start the grinding process.





Coming next The Grinding Process

Until then Rock On!
Jeannine
Handcrafted Jewelry

Friday, March 21, 2008

The Grinding and Polishing Process


This is our Genie made by Diamond Pacific it has 2 galaxy diamond grit grinding wheels 100 and 220 grit, it also has 4 nova diamond polishing wheels they are 280, 600, 1200 and 14,000. We also have a 50,000 grit wheel on another machine for finer polishing.
We are now ready to start the grinding process. The first grinding wheel is a 100 grit galaxy diamond wheel, on this wheel we do all of the rough grinding. First we will grind the stone down to the marked line that we made using a template of our choosing.

Then we will mark the perimeter of the stone for the girdle, indicated by the red arrow on the illustration, this is usually about 1/3 of the depth of the stone. The girdle mark is the guide that we will grind to when shaping the dome on the rock. The girdle is the part of your stone that will sit in your setting, or if you are wire wrapping your cabochon the wires will sit on the girdle. Now we draw two lines quartering the rock. Then use your templates and make two oval marks on the rock. These are guides for grinding your stone evenly around and to the center of the cabochon, making a perfectly shaped dome.
The red lines in this illustration indicate the grinding of the rock. From the girdle line on one side, rotate the cabochon to the girdle line on the other side, keep this rotating action from the girdle over the top to the girdle on the other side in all directions back and forth. Holding your dop stick and rocking in all directions cutting evenly all the way around and over the top. When you are happy with the shape of your cabochon then it will be time to go to the next wheel. From here on it will be a matter of removing the scratches made from the ginding wheel.
Do not hurry through this process. A rush job will result in the rock not polishing as well as it could. If you rush through usually you will need to go back to the previous wheels and grind more. With each progression of wheels you remove the scratches and marks until there finally are none. To check for scratches let the stone dry and check for whitish or dull marks, work the rock until all of those marks are gone. One method to check to see that your cabochon is evenly domed is to stand under a florescent light and check to see if the light reflection on your cab is in a true, unbroken line. If it is then your dome is true. If the line is broken or bent your dome shape is uneven and it will need more grinding.
If the shape is good then its time to do the final polish. Take your time to do a real good polish, it will be worth the extra time and effort. When you are ready to take your polished cabochon off the dop stick put it in a deep freeze for a few minutes and it will pop right off the stick, if there is a little residue of dop wax take a knife and carefully scrape the wax off. If you are setting the cab into a finding with a back then don't polish the back of the cab, but for wire wrapping of if the back is exposed then finish and polish the back as well.

Until next time Rock On!